Digital pH Meter at Best Price in India (Yellow)

Original price was: ₹599.00.Current price is: ₹499.00.

WIDE USE: This PH meter can be used as a professional laboratory test instrument or as a tool to improve the quality of life. Can be used to test drinking water, swimming pools, PH balance in the aquarium, RO system, spa, or hydroponics. Basically, all the environments that need to test pH values can use this tester to get accurate data.
AUTOMATIC TEMPERATURE COMPENSATION: No more need to take care about the temperature of testing liquid, as ph meter has built-in (ATC) automatic temperature compensation so that it can accurately determine the pH value of the sample at any temperature in a range of 0°C – 80°C (32°F – 176°F).
FAST AND ACCURATE: Ensure your pool, general hydroponics ph, or even drinking water has a perfect pH balance and is safe for use with Tester precision pH accuracy. The tester has a sensitive electrode sensor to read accurate pH levels. The included detailed manual will show you how to get the best accurate and stable reading.
Easy To Use: Just remove the protective cap and immerse the PH meter electrode in the solution and press the button to be measured. Beats the heck out of trying to see the colors of a litmus strip.
EXCELLENT AFTER-SALES: If you have any questions about the PH Meter, please feel free to let us know how to make it better. We will provide the best after-sales service. If you encounter any problems, please let us know in time, we will solve them for you within 24 hours.

SKU: Yellow pH meter Categories: Water Tester, RO ACCESSORIES Tags: Best pH meter, Digital pH meter, PH METER, pre-calibrated ph meter

Shapure Digital pH Meter

Table of Contents

How To Use:

Remove the protective cap. Do not be alarmed if white crystals appear around the cap. This is normal with pH electrodes and they dissolve when rinsed with water.
Turn the meter on by sliding the switch on the top.
Immerse into solution up to the max immersion level.
Stir gently and wait until the display stabilizes.
After use, switch off the pH meter, use the water clean the electrode and replace the protective cap.

Note:

Don’t touch the electrode with fingers or abrasive, hard tools. Always replace the protective cap after use to keep the electrode from drying out.
Clean the electrode before and after each use.
If the meter cannot seem to be turned on or the display seems to fade, open the battery case and replace the battery (pay attention to polarity), then recalibrate the meter.

Specification:

Measuring Range: 0-14.0
pH Resolution: 0.01 pH
Accuracy: ±0.01 pH
Battery: 2x 1.5V(AG-13)
Auto Temperature Compensation: 0-50°C
Dimensions: 15 X 3 X 1.6 cm

How To Calibrate pH Meter?

Turn on the pH meter

Dissolve each buffer solution in 250 ml of distilled water

Immerse the electrode into the pH 6.86 solution gently stir and wait over 5 minutes. (Under Room temperature)

Calibrate the pH meter by regulating the trimmer with the help of the screwdriver provided inbox until it shows 6.86 in the Display

Rinse the electrode with distilled water and make it dry with filter paper.

Repeat the above steps with other pH buffer powders.

Please note:

1. Clean the electrode with distilled water before and after each use.

2. Do not touch the electrodes with hard tools or fingers. Always put on the protective cap to prevent the electrode from drying out and damaging it.

3. When measuring, the depth of the PH meter probe inserted into the water should not exceed the length of the PH pen cap to prevent damage to the circuit board.

4. When the meter cannot be turned on or the display fades, please open the battery box and replace the battery (pay attention to the polarity), and then recalibrate the meter.

5. When calibrating each package of calibration powder, add distilled water no more than 250ML, too much water will easily cause errors.

6. Store the PH meter in a cool and dry place to prevent damage caused by moisture.

7. If you have white crystalline residue near the fill cap or on the electrode, there is no need to worry. These crystals are simply electrolyte salt that has dried. If the pH sensing glass and junction are still hydrated, just rinse down the electrode with deionized or distilled water.